Exam JN0-637 Questions Answers, JN0-637 Reliable Braindumps Files

Blog Article

Tags: Exam JN0-637 Questions Answers, JN0-637 Reliable Braindumps Files, Real JN0-637 Exam, JN0-637 Latest Exam Review, JN0-637 Cert Exam

2025 Latest 2Pass4sure JN0-637 PDF Dumps and JN0-637 Exam Engine Free Share: https://drive.google.com/open?id=1cJ-mKJ3r4KqPJP1jKx9qB97_f2tUZTli

The JN0-637 exam question offer a variety of learning modes for users to choose from, which can be used for multiple clients of computers and mobile phones to study online, as well as to print and print data for offline consolidation. For any candidate, choosing the JN0-637 question torrent material is the key to passing the exam. Our study materials can fully meet all your needs: Avoid wasting your time and improve your learning efficiency. Spending little hours per day within one week, you can pass the exam easily. You will don't take any risks and losses if you purchase and learn our JN0-637 Latest Exam Dumps, do you?

Juniper JN0-637 Exam Syllabus Topics:

Topic	Details
Topic 1	Advanced Policy-Based Routing (APBR): This topic emphasizes on advanced policy-based routing concepts and practical configuration or monitoring tasks.
Topic 2	Layer 2 Security: It covers Layer 2 Security concepts and requires candidates to configure or monitor related scenarios.
Topic 3	Multinode High Availability (HA): In this topic, aspiring networking professionals get knowledge about multinode HA concepts. To pass the exam, candidates must learn to configure or monitor HA systems.
Topic 4	Logical Systems and Tenant Systems: This topic of the exam explores the concepts and functionalities of logical systems and tenant systems.
Topic 5	Advanced IPsec VPNs: Focusing on networking professionals, this part covers advanced IPsec VPN concepts and requires candidates to demonstrate their skills in real-world applications.
Topic 6	Automated Threat Mitigation: This topic covers Automated Threat Mitigation concepts and emphasizes implementing and managing threat mitigation strategies.

>> Exam JN0-637 Questions Answers <<

Juniper JN0-637 Reliable Braindumps Files | Real JN0-637 Exam

In order to save a lot of unnecessary trouble to users, we have completed our JN0-637 study questions research and development of online learning platform, users do not need to download and install, only need your digital devices have a browser, can be done online operation of the JN0-637 test guide. This kind of learning method is very convenient for the user, especially in the time of our fast pace to get JN0-637 Certification. When using our JN0-637 training materials, all the operations of the JN0-637 learning material of can be applied perfectly.

Juniper Security, Professional (JNCIP-SEC) Sample Questions (Q107-Q112):

NEW QUESTION # 107
You are configuring advanced policy-based routing. You have created a static route with next hop of an interface in your inet.0 routing table

Referring to the exhibit, what should be changed to solve this issue?

A. You should change the routing instance type to virtual-router.
B. You should delete the interface-routes configuration under the routing-options hierarchy.
C. You should move the inet. o table before the routing instance table in your rib-groups configuration.
D. You should move the static route configuration to the main routing instance.

Answer: C

NEW QUESTION # 108
You need to set up source NAT so that external hosts can initiate connections to an internal device, but only if a connection to the device was first initiated by the internal device.
Which type of NAT solution provides this functionality?

A. Persistent NAT with any remote host
B. Address persistence
C. Static NAT
D. Persistent NAT with target host

Answer: D

Explanation:
Persistent NAT with target host allows external hosts to establish connections only when the internal device initiates a session first, ideal for specific interactive applications. Refer to Juniper Persistent NAT Documentation.
The scenario requires that external hosts be able to initiate a connection only if the internal device has already initiated a connection. The correct solution is Persistent NAT with target host, which ensures that a specific external host can initiate new connections back to the internal device, but only after the internal device has established a session first.
* Persistent NAT with Target Host (Answer C): This allows the internal device to initiate a connection, and once established, the specified external host can also initiate new connections to the internal device on the same NAT mapping.
Example Configuration:
bash
set security nat source persistent-nat permit target-host-port
This solution is appropriate when controlled bidirectional communication is required based on an internal- initiated connection.

NEW QUESTION # 109
you must find an infected host and where the aack came from using the Juniper ATP Cloud.
Which two monitor workspaces will return the requested information? (Choose Two)

A. Threat Sources
B. File Scanning
C. Hosts
D. Encrypted Traffic

Answer: A,C

Explanation:
To find an infected host and where the attack came from using the Juniper ATP Cloud, you need to use the Hosts and Threat Sources monitor workspaces.
The other options are incorrect because:
B) The File Scanning monitor workspace shows the files that have been scanned by the Juniper ATP Cloud and their verdicts (clean, malicious, or unknown). It does not show the infected hosts or the attack sources1.
D) The Encrypted Traffic monitor workspace shows the encrypted traffic that has been decrypted by the Juniper ATP Cloud and the certificates that have been used. It does not show the infected hosts or the attack sources2.
Therefore, the correct answer is A and C. You need to use the Hosts and Threat Sources monitor workspaces to find an infected host and where the attack came from using the Juniper ATP Cloud.
To do so, you need to perform the following steps:
For Hosts, you need to access the Hosts monitor workspace in the Juniper ATP Cloud WebUI by selecting Monitor > Hosts. You can see the list of hosts that have been detected by the Juniper ATP Cloud and their risk scores, infection levels, and threat categories. You can filter the hosts by various criteria, such as IP address, hostname, domain, or threat category. You can also drill down into each host to see the details of the files, applications, and incidents associated with the host. You can identify the infected host by looking for the host with the highest risk score, infection level, or threat category3.
For Threat Sources, you need to access the Threat Sources monitor workspace in the Juniper ATP Cloud WebUI by selecting Monitor > Threat Sources. You can see the list of threat sources that have been detected by the Juniper ATP Cloud and their risk scores, threat categories, and geolocations.
You can filter the threat sources by various criteria, such as IP address, domain, or threat category.
You can also drill down into each threat source to see the details of the files, applications, and incidents associated with the threat source. You can identify the attack source by looking for the threat source with the highest risk score, threat category, or geolocation that matches the infected host.
Reference: File Scanning
Encrypted Traffic
Hosts
[Threat Sources]

NEW QUESTION # 110
You have deployed two SRX Series devices in an active/passive multinode HA scenario.
In this scenario, which two statements are correct? (Choose two.)

A. Services redundancy group 1 (SRG1) is used for services that do not have a control plane state.
B. Services redundancy group 0 (SRG0) is used for services that have a control plane state.
C. Services redundancy group 0 (SRG0) is used for services that do not have a control plane state.
D. Services redundancy group 1 (SRG1) is used for services that have a control plane state.

Answer: B,C

Explanation:
In a Juniper SRX high-availability (HA) scenario, redundancy is achieved through the use of redundancy groups. Redundancy groups are assigned to control specific functions in an active/passive setup. The HA configuration uses redundancy groups to manage failover between the two SRX nodes.
* SRG0 (Services Redundancy Group 0):
* Correct: Option B: SRG0 is used for control plane functions like routing engine redundancy.
This group manages the Routing Engine (RE) failover and ensures that routing decisions continue seamlessly during failovers.
* Correct: Option C: SRG0 is also responsible for services without control plane states. These services can include lower-level services such as packet forwarding and stateful firewall services.
SRG0 handles both critical and basic functions since control plane elements are essential for network operations during failover events.
* SRG1 (Services Redundancy Group 1):
* SRG1, contrary to SRG0, is typically used for data plane services and does not manage control plane state. It handles services like security policies, NAT, and VPN functions but does not involve control plane redundancy.
Juniper References:
* Juniper SRX HA Documentation: The role of redundancy groups in HA, detailing that SRG0 is reserved for the most crucial services, including control plane failover and basic packet forwarding.

NEW QUESTION # 111
Exhibit

You are implementing filter-based forwarding to send traffic from the 172.25.0.0/24 network through ISP-
1 while sending all other traffic through your connection to ISP-2. Your ge-0/0/1 interface connects to two networks, including the 172.25.0.0/24 network. You have implemented the configuration shown in the exhibit. The traffic from the 172.25.0.0/24 network is being forwarded as expected to 172.20.0.2, however traffic from the other network (172.25.1.0/24) is not being forwarded to the upstream 172.21.0.2 neighbor.
In this scenario, which action will solve this problem?

A. You must apply the firewall filter to the lo0 interface when using filter-based forwarding.
B. You must add another term to the firewall filter to accept the traffic from the 172.25.1.0/24 network.
C. You must specify that the 172.25.1.1/24 IP address is the primary address on the ge-0/0/1 interface.
D. You must create the static default route to neighbor 172.21 0.2 under the ISP-1 routing instance hierarchy.

Answer: D

NEW QUESTION # 112
......

Security, Professional (JNCIP-SEC) has introduced practice test (desktop and web-based) for the students so they can practice anytime in an easy way. The Security, Professional (JNCIP-SEC) (JN0-637) practice tests are customizable which means the students can set the time and questions according to their needs. The JN0-637 Practice Tests have unlimited tries so that the users don't make extra mistakes when giving it the next time. Candidates can access the previously given tries from the history and avoid making mistakes in the final examination.

JN0-637 Reliable Braindumps Files: https://www.2pass4sure.com/JNCIP-SEC/JN0-637-actual-exam-braindumps.html

What's more, part of that 2Pass4sure JN0-637 dumps now are free: https://drive.google.com/open?id=1cJ-mKJ3r4KqPJP1jKx9qB97_f2tUZTli

Report this page

EXAM JN0-637 QUESTIONS ANSWERS, JN0-637 RELIABLE BRAINDUMPS FILES

Exam JN0-637 Questions Answers, JN0-637 Reliable Braindumps Files